Julie_2017：求可以做应急灯外壳配件模具的供应商
大家好，请问谁家可以做应急灯外壳配件的模具，产品尺寸偏大200-400mm之间，有的话请加QQ联系：282062022
jasonmould：JasonMolding, China’s leading plastic injection molding company is pleased to present their custom plastic injection molding along with a variety of molding and dies development and manufacturing services. For over 10 years now, the company has been involved in plastic injection molding and this process involves producing plastic parts in high volumes using the most recent techniques and machinery. Heated barrels and special mold cavities are used to create precise shapes, forms and sizes of various plastic objects.
Today Jasonmolding tell you how to produce high quality injection molded plastic parts.
Injection molding is an accessible, ubiquitous process that you can use in the manufacture of different products. This process is quite versatile, making it a very good choice for products, but you must be careful with the process and the product design if at all you are to get efficiently molded plastic parts that are high in quality. The decision you make in the production process will largely determine the final products that you are able to achieve. Fortunately, using a few design principles, you can get the high quality plastic parts that you need from injection molding.
Remember the process necessities.
Injection molding has two halves of mold hollowed using the negative image of the part before the hot liquefied plastic is injected into the mold and left to cool. The two halves are then pulled apart when cooling has taken place effectively. Remember to position the gate properly so that removal of finished product does not interfere with the part integrity. Because the plastic material will shrink in the cooling process, be careful with the part dimensions and design elements to get high quality results. You also want to think about the parting line when making the design so it is located in an appropriate area on the final product during part release.
Pay attention to wall thickness
One of the best things you can do when manufacturing plastic parts is to design with manufacturability in mind. Whereas most manufacturers may work with a uniform wall thickness for injection molds, shrinkage factor during cooling process can lead to improperly designed molds and also products. Let thicker areas be on lower mold parts so that gravity can help in still-cooling the materials in all the right ways.
Do proper cooling and ejection
Quality injection mold does not only rely on how the process is handled but also on how effective and efficient the cooling system is. The mold should maintain consistent temperature to avoid warping and shrinkage while at the same time minimizing cycle times for maximum production output. Ensure therefore, that the cooling system for your plastic parts is well-designed for quality purposes. Releasing parts from mold should also be done with care. Ensure that cycle times, type of ejection mechanism and placement of ejector pins are calculated with precision so that defects are kept minimal on the final product.
Run samples to improve quality
One of the best ways of avoiding rework on your mold cavity it to create a sample mold first to test run your part. This move will help in determining whether there should be any adjustments to the mold or molding parameters and resin selection. Any quality issues can easily be collected through sampling the part and this saves money and time. When you run samples you are able to ensure that the final parts are up to expected standards.
Your injection mold maker should be good enough to avoid the common mistakes experienced, especially when dealing with plastic parts.
China plastic injection molding results are as good as the injection mold maker you choose. Think your part through before choosing the best China mold manufacturer.
About https://www.jasonmolding.com/
JasonMould Industrial Company Limited, https://www.jasonmolding.com/ based at GuangDong Province, China was established in 2010. The company is a leading manufacturer of injection moulding and specializes in plastic moulding for use in household appliances, electronic equipment, medical and safety equipment and monitoring systems.
Contact:
JasonMould Industrial Company LimitedAddress: LongGang Village, LongXi Town, BoLuo County, HuiZhou City, GuangDong Province, China
Phone: 86-752-6682869
Email: Info@JasonMolding.com
Website: https://www.jasonmolding.com/
YUAN116：我司主营：DHL FEDEX TNT UPS ARAMEX EMS（大陆渠道不排仓）
更有国际专线，FBA亚马逊专线 双清包税 低价强势收货；
国际专线：美加俄日泰澳洲印度伊朗阿联酋等国际专线
纯电池双清包税无DG费：欧洲专线、美加专线、澳洲专线
更多优势、欢迎咨询QQ2885395951，13902481149 微信电话同步。
塑胶压铸模具：一个具有创新研发能力的公司，一个拥有完善售后体系的公司，一个凝聚专业生产能力的公司
主营塑胶模具、压铸模具、塑胶产品注塑、锌合金、铝合金压铸成型。
主要模具产品为汽车产品、家电产品、消费产品、电子和医疗健体产品五大类型
我们公司拥有强大的设计团队和模具制造团队一站式服务，让你更省心更放心 ！我们只用实力说话，实事求是，
欢迎实地验厂洽谈 ! 我们相信本公司的努力一定会成为贵公司发展的最好伙伴！
公司名称：深圳市中盛精密模具有限公司
电话：13823389061钟先生
QQ：781753069
E-mail：781753069@qq.com
地址：广东省深圳市光明新区公明镇
